GARMIN GTR 20 REMOTE COMM RADIO FOR G3X TOUCH

Koszt wysyłki:od 0,00 zł

Numer katalogowy:21673939

Kod producenta:010-01076-11

Stan magazynowy:

Kod EAN/Wewnętrzny:5900033924104

Zapytaj o produkt Poleć znajomemu Specyfikacja PDF

Opis produktu
Recenzje produktu (0)

Overview

Going above and beyond the call of duty of a traditional Comm, the GTR 20 includes a 2-place stereo intercom that is ideal for 2-seat aircraft; no additional hardware is required to communicate with your passenger. Advanced auto squelch automatically senses the noise level in the cockpit and adjusts the mic squelch for effortless intercom use regardless of the cockpit noise level. G3X Touch interface alloes access to emergency frequency tuning, pilot audio isolation, saved frequencies list, music mute or push-to-talk. Plus, optional installed remote switches on the flight controls allow pilots to keep their hands on the controls while performing functions like swapping the active and standby frequencies.

Enjoy Crystal-Clear Standby Frequency
Monitoring

With its standby frequency monitoring feature, the GTR 20 gives you the ability to listen to ATIS while monitoring ATC. Swapping your active and standby frequencies is done through the G3X Touch display or optionally installed switches on the controls. Even in single-radio aircraft, you’ll no longer have to worry about missing an ATC call or other critical transmission. 3D Audio capability separates the active and standby frequencies in your headset so it’s easier to differentiate between sources.

COM Transmitter Specifications

Microphone input: Two inputs, standard carbon or dynamic mic with integrated preamp. The GTR 200 provides a 150 Ω AC input impedance and supplies the microphone with an 11 V bias through 470 Ω +/- 5 percent
Modulation capability: 85 percent with 250 to 2500 mVRMS microphone input at 1000 Hz
Modulation: AM double sided emission designator, 6K00A3E (118-136.975 MHz)
Frequency range: 118.000 to 136.975 MHz, 25 kHz channel spacing
Frequency tolerance: +/-5 ppm from -20°C to +55°C
Output power: 10 W carrier minimum
Duty cycle: 20 percent
Carrier noise level: At least 35 dB (SNR)
Stuck mic time-out: 35 seconds time-out, reverts to receive
Demodulated audio distortion: Less than 25 percent distortion when the transmitter is at 85 percent modulation at 350 to 2500 Hz

COM Receiver Specifications

Frequency range: 118.000 to 136.975 MHz, 25 kHz channel spacing
Headset audio output: 60 mW minimum into a 150 Ω load
Audio response: Less than 6 dB of variation between 350 and 2500 Hz
Audio distortion: Less than 25 percent at rated output power
Sensitivity: SINAD greater than 6 dB when the RF level is -107 dBm with 30 percent modulation
Squelch: Automatic squelch with manual override

Features

Best-in-class, all-in-1 radio and stereo intercom solution
Powerful 10 W Remote Comm displaying on the G3X Touch
Advanced standby monitoring, crystal clear stereo input and input for system alerts
Gain More than Just a Comm
Designed specifically for light sport (LSA) and experimental aircraft, the GTR 20 combines powerful Comm capabilities with advanced workload-reducing features formerly only found in high-end certified systems. Its remote design allows you to make the most of limited space in your panel while 10 W of transmit power helps ensure solid communications between you and ATC or other aircraft in your vicinity. The GTR 20 offers 25 kHz channel spacing and utilizes a standard density 37-pin connector for easy installation.

Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.

Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszym sklepie zaloguj się na nie, jeżeli nie załóż bezpłatne konto i napisz recenzję.

Pozostałe produkty z kategorii

GARMIN GTR 20 REMOTE COMM RADIO FOR G3X TOUCH

Overview

Features

f.u.n.k.e. VHF Transceiver ATR833A-OLED - funke

ATR833-II-OLED

285965 Adapter plug KRT2 Becker 3201

f.u.n.k.e. VHF Transceiver ATR833-II-LCD - 57 mm - funke

285962 KBS3 Two-seater cable set for gliders with remote wiring